1. <dd id="oitg9"><xmp id="oitg9"><pre id="oitg9"></pre>

        <sup id="oitg9"><pre id="oitg9"></pre></sup>
        <noscript id="oitg9"></noscript>
            <noscript id="oitg9"></noscript>
            Hello, welcome to the official website of Dongguan Geally Refrigeration Technology Co., Ltd.! Message Product Map

            ONE-STOP SERVICE PROVIDER FOR ICE MAKING EQUIPMENTS

            Ice Making,Freezing and Refrigeration Technology
            Hotline:
            +86 769-81881389

            The composition system of the flake ice machine and how to maintain it?

            Author:Dongguan Geally Refrigeration Technology Co., Ltd Date:2022-08-30 Reading:

            At present, most of the flake ice machines on the market use the ice-making method in which the internal ice blade rotates and scrapes the ice. This method has little wear and can effectively prevent refrigerant leakage. Because the flake ice itself is also thin, the flake ice produced in this mode is relatively uniform. The following editor will introduce the composition system of the flake ice machine and how to maintain it. Welcome to read!

            The composition system of flake ice machine:

            1. Water circulation system, the tap water of the water circulation system passes through the water supply pipe. The float valve flows into the tank. The water in the water tank is pressed into the water separator by the pump to maintain a certain water level, and then naturally flows into the inner surface of the evaporator, and at the same time, it gradually cools and partially freezes into ice. Under the action of the ice blade, the ice falls off the surface of the evaporator and falls into the refrigerator, and the rest of the water returns to the water tank.

            2. Refrigeration system, when the liquid refrigerant flows through the evaporator cylinder, the refrigerant that starts to evaporate cools the evaporator cylinder through heat exchange. At the same time, part of the water flowing through the inner surface of the evaporator is frozen into ice, which is separated from the surface of the evaporator under the action of the ice blade and falls into the refrigerator. Under the action of the pump, the return water is again frozen into ice through the evaporator, forming a cycle of ice making.

            3. Transmission system, including deceleration motor and deceleration device. The reducer drives the reducer to rotate, and the output shaft of the reducer drives the main shaft. The ice blade and the water distribution plate rotate. After the inner wall of the evaporator freezes, the ice blade separates the ice from the inner surface of the evaporator and falls into the refrigerator.

            4. Control system, the control system monitors the entire working process of the flake ice machine by the computer board. For example, ① the water tank is short of water, ② the speed of the reducer is low, ③ the temperature of the evaporator is high, and the machine is protected under abnormal conditions.

            Maintenance of flake ice machine:

            Before the maintenance of the flake ice machine, turn off the main power supply of the flake ice machine to carry out the following work:

            1. It is recommended to clean the water tank, evaporator, water storage tank, water distribution tray and surface of the flake ice machine once a month.

            2. The condenser of the flake ice machine plays the role of heat dissipation in the refrigeration process. The cleanliness of the condenser directly affects the ice-making effect, and the cleanliness of the condenser must be guaranteed. The air-cooled condenser is recommended to be cleaned once every three months under normal circumstances, and once a month under special circumstances; the water-cooled condenser is cleaned once every six months under normal circumstances, and once every three months under special circumstances, and the cooling tower is recommended to be cleaned once a month .

            3. Check the gap between the ice blade and the ice bucket every six months; check the oil level of the reducer every six months, and it is recommended to change it every twelve months.

            4. The flake ice machine should always observe the oil level and the color of the oil in the compressor with the oil sight glass. The oil level of the compressor is normal, and the refrigeration oil is transparent and colorless. If there is a qualitative change, it needs to be replaced by a professional.

            5. When the flake ice machine is out of use for a long time (more than 15 days), if the ambient temperature before the deactivation is below 5°C, and the ice machine uses a water-cooled condenser, the water in the condenser should be drained to avoid frostbite and condensation. Before starting the machine, please carefully check the various parts of the ice maker and water supply.

            Thank you for reading, the above is the composition system of the flake ice machine and how to maintain it? The introduction, part of the content comes from the Internet, for reference only. If you want to know more details about the flake ice machine, please call for details and serve you wholeheartedly.


            Share:
            中文字幕久久久久人妻| 精品人妻伦九区久久AAA片69| 精品多毛少妇人妻AV免费久久| 国产2021久久精品| 蜜臀久久99精品久久久久久| 亚洲日本va午夜中文字幕久久| 精品无码久久久久国产动漫3d| AV色综合久久天堂AV色综合在| 国产精品青草久久久久福利99| 久久天天躁狠狠躁夜夜不卡| 国产一久久香蕉国产线看观看 | 午夜视频久久久久一区 | 色婷婷综合久久久中文字幕| 国产亚洲欧美成人久久片| 97精品伊人久久大香线蕉| 一本大道久久a久久精品综合| 婷婷国产天堂久久综合五月| 日本道色综合久久影院| 一本久久a久久精品vr综合| 久久综合九色综合欧美就去吻| 国产精品久久久久久久| 精品久久久久久国产| 久久国产视屏| 国产免费福利体检区久久| 国产亚洲综合久久系列| 久久综合亚洲色一区二区三区| 午夜精品久久久久成人| 久久免费视频6| 久久99国产一区二区三区| 亚洲狠狠综合久久| 久久99精品国产一区二区三区| 亚洲国产精品无码久久SM| 少妇久久久久久被弄高潮| 久久久久青草线蕉综合超碰 | 99999久久久久久亚洲| 伊人久久大香线焦AV综合影院| 亚洲Av无码国产情品久久| 蜜桃麻豆www久久国产精品| 久久久久无码精品国产app| 欧洲国产伦久久久久久久 | 久久香综合精品久久伊人|